SEPLITE® LSC730
SEPLITE® LSC 730 is a Monophosphonic Chelating Resin.
It is specially developed for the selective iron removal from acidic solutions, such as acid, nickel, cobalt and zinc processing solutions, copper electrolyte etc.
For SEPLITE® LSC 730,it enjoys the advantage of below:
-
Superior mechanical and excellent resistance to osmotic shock
Good mechanical strength, low loss, less topping annually, stable Kinetics performance
-
High adsorption capacity
High adsorption capacity leads to bigger amount of substance treated per cycle
SEPLITE® LSC730 Monophosphonic Chelating Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Crosslinked |
| Function group | Monophosphonic |
| Physical Appearance | Spheres |
| Particle range (mm) | 0.3-1.25 |
| Moisture Content (%) | 50-60 |
| Bulk Density (g/l) | 700-800 |
| Density (g/l) | 1150-1250 |
| Total capacity(eq/L) | ≥18 g/l (Fe) |
| Uniformity coefficient | ≤1.6 |
| Shipping form | H+ |
SEPLITE® LSC730 Monophosphonic Chelating Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
