SEPLITE® CT310W strong acid polymeric catalyst resin for Bisphenol-A reaction or esterification reactions
SEPLITE® CT310W is a spherical beads, gel type strong acid polymeric resin, specially designed as a catalyst used in Bisphenol-A reaction or esterification reactions (acrylates production).
SEPLITE® CT310W Catalyst Resin For Bisphenol-A Reaction Physical and Chemical Characteristics:
Ionic form | H+ |
Functional group | Sulfonic acid |
Matrix | Crosslinked polystyrene |
Physical appearance | opaque beads |
Total Capacity H+ |
≥1.35 eq/L ≥4.8 eq/kg |
Water retention % | 63-67 |
Shipping weight g/ml | 0.70-0.80 |
Density g/ml | 1.10-1.20 |
Particle size mm | 0.40-1.25 |
Harmonic mean size mm | 0.55-0.80 |
Whole beads count % | ≥95 |
Uniformity coefficient | ≤1.6 |
Maximum Operating temperature ℃ | 130 |
Recommended storage temperature ℃ | Room temperature |
SEPLITE® CT310W Catalyst Resin For Bisphenol-A Reaction Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wet and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® local sales directly.