SEPLITE® Monojet CT1230W Gel Type Strong Acid Polymeric Resin
SEPLITE® Monojet CT1230W is an uniform particle size, Gel type strong acid polymeric resin based on the matrix of very low crosslinked styrene-DVB copolymers, it is designed as a catalyst for organic reactions.
It has good resistance to polymer fouling with excellent performance, and highly reduced pressure drop and achieved higher productivity than conventional catalyst.
It is mainly used in the applications of Bisphenol-A production, condensations and esterifications of small polar molecules, hydrolysis of ethers and esters.
SEPLITE® Monojet CT1230W Gel Type Strong Acid Polymeric Resin Physical and Chemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Crosslinked polystyrene |
| Physical appearance | opaque beads |
| Total Capacity H+ | ≥4.9 mmol/g |
| Water retention % | 75-85 |
| Shipping weight g/ml | 0.65-0.75 |
| Density g/ml | 1.05-1.15 |
| Particle size mm | 0.90-1.00 |
| Whole beads count % | ≥95 |
| Uniformity coefficient | ≤1.1 |
| Maximum Operating temperature ℃ | 130 |
| Recommended storage temperature ℃ | Room temperature |
SEPLITE® Monojet CT1230W Gel Type Strong Acid Polymeric Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wet and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® local sales directly.
Contact Us
