SEPLITE® LSF970 SERIES

FOOD PROCESSING
As the pioneer in this field in China, Sunresin was the first provider applying the resin adsorbent techniques in food processing. Up to now in the Chinese market, the adsorbent techniques applied in juice industries all originated from Sunresin initiation. After 20 years continuously technical innovation and industrialization in this field, new resins and solutions specialized for food processing have stood firmly in the market, which are separately specified for nutrition products, fruit juices such as apple, orange, pear , pineapple , lemon, grape and pomegranate, as well as in sugar industries. More than 5000M³ of the these products have been supplied to beverage industry of both domestic and overseas with over tens of production lines scoping from 5t/hr to 100t/hr.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.

SEPLITE®Adsorbent Resins for Fruit Juice processing such asApple, Pear, Grape, Pineapple, Citrus, Lemon and Bee honey

SEPLITE® LSF970 SERIES Adsorption Resin

Type:Styrene / DVB Gel, SAC
Shipping form:Na+
Moisture (%):45-50
Bulk Density (g/ml):0.77-0.87
Total Capacity(eq/l):≥1.9
Particle size (mm):0.315-1.25
Application:Demineralization and decolorization for in sugar industries such as xylose, glucose and maltose etc.  Removal of ash, metal ions, pigment, acid matters, pesticides and HMF.

SEPLITE® LSF970 SERIES Adsorption Resin Precautions

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi’an

• This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.