SEPLITE® CT102
SEPLITE® CT102 is applied to the removal of metal ions and basic nitrogen compounds from organic raw materials, and can effectively prolong the service lifetime of primary catalyst.
SEPLITE® CT102 Catalyst Resin PhysicalandChemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Crosslinked polystyrene |
| Physical appearance | Light brown opaque beads |
| Total Capacity (dry) mmol/g [H+] | ≥5.0 |
| Water content % | 50-58 |
| Shipping weight g/ml | 0.74-0.86 |
| Density g/ml | 1.13-1.25 |
| Particle size mm, % | (0.315-1.25)≥95 |
| Whole beads count % | ≥95 |
SEPLITE® CT102 Catalyst Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
