SEPLITE® CT502
SEPLITE® CT1210W is an uniform particle size, Gel type strong acid polymeric resin based on the matrix of very low crosslinked styrene-DVB copolymers, specially designed as a catalyst for producing BPA of unsurpassed color and purity.
It has good resistance to polymer fouling and highly reduced pressure drop and achieved higher productivity than conventional catalyst.
SEPLITE® CT502 Macroporous Catalytic Resin Physical and Chemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Crosslinked polystyrene |
| Physical appearance | opaque beads |
| Total Capacity H+ |
≥0.73 eq/L ≥4.8 mmol/g |
| Water retention % | 74-84 |
| Shipping weight g/ml | 0.70-0.80 |
| Density g/ml | 1.10-1.20 |
| Harmonic mean size mm | 0.70-0.80 |
| Whole beads count % | ≥95 |
| Uniformity coefficient | ≤1.15 |
| Maximum Operating temperature ℃ | 130 |
| Recommended storage temperature ℃ | Room temperature |
SEPLITE® CT502 Macroporous Catalytic Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wet and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® local sales directly.
Contact Us
