SEPLITE® CT8110
SEPLITE® CT 8110 is a strong acid, gel polymer catalyst with sulfonic acid functional group. The uniform particle size, low cross-linkage and stable mechanical property makes it an excellent catalyst in the processing of liquid organic media.
SEPLITE® CT8110 Catalyst Resin Physical and Chemical Characteristics:
| Ionic form | H+ |
| Functional group | Sulfonic acid |
| Matrix | Styrenic |
| Physical appearance | Brown translucent beads |
| Total Capacity eq/L | ≧0.7 |
| Uniformity coefficient | <1.1 |
| Particle size mm | 0.90-1.20 |
| Bulk density g/L | 670-750 |
| Water content % | 75-80 |
| Operating temperature ℃ | 1 to 130 |
| Recommended storage temperature ℃ | -20 to 40 |
SEPLITE® CT8110 Catalyst Resin Applications:
-
Small polar molecules' condensation and esterification reactions
-
Manufacturing of Bisphenol-A
-
Hydrolysis of ethers and esters
SEPLITE® CT8110 Catalyst Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
