SEPLITE® LSC724
SEPLITE® LSC 724 is a macroporous polystyrene based thiourea chelating resin, with functional groups designed for the selective removal of heavy metals, especially for Hg, Pt, Pd etc.
LSC 724 can be useful for problems where removal of ions Hg, Pt, Pd is desired.
The most common application for LSC 724 is for mercury in different solutions. Other Application may be found in different fields of chemical technology such as waste water treatment, recovery of precious metals from rinse waters in the electronic industries.
Considered the long usage time and tight combination of mercury, normally it is not recommended to regenerate for reuse. Exhausted resins can only be disposed in accordance with the local regulations.
SEPLITE® LSC724 Thiourea Chelating Resin Physical and Chemical Characteristics:
| Matrix Structure | Polystyrene DVB, Macroporous |
| Function group | Thiourea |
| Physical Appearance | Beige spheres |
| Particle range (mm) | 0.4-1.25 (98%) |
| Moisture Content (%) | 38-48 |
| Bulk Density (g/l) | 650-750 |
| Density (g/l) | 1050-1150 |
| Total capacity (eq/L) | ≥1.0 |
| pH limits | 0-14(Stability) |
SEPLITE® LSC724 Thiourea Chelating Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
