SEPLITE® LSC790
SEPLITE® LSC 790 is a macroporous crosslinked polystyrene resin impregnated with Di-(2-EthylHexyl)Phosphoric Acid (D2EHPA).
Generally the principle is impregnating D2EHPA on resins for easier separation and stripping.
It also greatly simplify the process of operation.
For performance, the selectivity of loaded resin is same or better than D2EHPA.
To avoid loss of D2EHPA, Sunresin has specially designed the matrix for tighter bonding.
Recommended operation PH is under 4, resins are ready to use upon receiving.
SEPLITE® LSC790 Chelation Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Styrene-divinylbenzene copolymer |
| Structure | Macroporous,D2EHPA loaded |
| Physical Appearance | White spheres |
| Particle range (mm) | 0.35-1.65 |
| Moisture Content (%) | 20-30 |
| Bulk Density (g/l) | 600 (+/- 5%) |
| Content D-2-EHPA(%) | No less 40 |
SEPLITE® LSC790 Chelation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
