SEPLITE® MB10IND
SEPLITE® MB10 IND is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resins
The resins were prepared with fixed ratio, with the aim of producing high quality purified water.
With color indicator on the resins, before the resin was used, the resins showed color of jade green.
After period of operation, the resins were exhausted, the color of the resins would automatically turned into rosy red for alert.
SEPLITE® MB10 IND is suitable being loaded either in small cartridges and big industrial resin columns.
SEPLITE® MB10IND Strong Acid Cation Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Polystyrene Crosslinked with DVB |
| Shipped form | H+/OH- |
| Physical Appearance | Mixture of white to yellow spheres |
| Cation/Anion ratio | 1:1 |
| Functional Group | Sulphonic acid and trimethylammonium |
| Particle size (mm) | 0.315-1.25 |
| Moisture content (%) | 57-67 |
| Bulk Density ( g/l) | 700-770 |
| Density ( g/l) | 1100-1200 |
| Fine beads (%) | ≥95 |
SEPLITE® MB10IND Strong Acid Cation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
