SEPLITE® MB30

SEPLITE® MB30 is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resins
The resins were prepared with fixed ratio, with the aim of producing high quality purified water.
It could be loaded either in small cartridges and big industrial resin columns.
By using this mixed bed, projects requiring high demineralized water, low silica, TOC could be handled.
Normally this resin was not suggested being regenerated, if required, by back washing and separating the anion/cation, the resins could be regenerated separately.
With requested, the resin could be loaded with color indicator showing exhaustion, that is Sunresin model MB30 IND

SEPLITE® MB30 Mixed Bed Resin Physical and Chemical Characteristics:

SEPLITE® MB30 Mixed Bed Resin Precautions:

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.

SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an

• This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.