PDS Monojet LSF9733
Physical and Chemical Characteristics
Matrix Structure | Macroporous, Styrene-divinylbenzene |
Functional group | Tertiary amine/Quaternary amine |
Shipping form | FB |
Physical Appearance | Cream white to light yellow spherical beads |
Mean Particle size (mm) | 0.55±0.05mm |
Moisture content (%) | 55-65 |
Total Capacity(eq/L) | ≥1.3 |
Bulk Density ( g/l) | 650-750 |
Density ( g/l) | 1030-1130 |
Whole beads count (%) | ≥95 |
Uniformity coefficient | ≤1.1 |
Volume change (delivered to Cl-) Max. vol.% |
28% |
Recommended Operating Conditions
Operating pH | 0-7 |
Maximum Operating temperature | 100°C (OH-) |
Minimum Bed depth | 900 mm |
Operating flow rate | 2-4 BV/h |
Regenerants Concentration Regeneration level Regeneration time Total Rinsing water |
NaOH 2-4% 65- 80 kg/m3 30-45 minutes 3-5 BV |
Precautions
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
·This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.