SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium
SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium PRODUCT INFORMATION:
SEPLITE® LSC718
Specially developed resin for selective removal of radium
SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium Descriptions:
SEPLITE® LSC718 is a barium salt impregnated resin.
SEPLITE® LSC718 is specially developed for selective extraction of radium in drinking water system components. Base on the optimized formulation & matrix construction, LSC718 provide excellent mechanical strength.
It will perform splendid extraction volume in drinking water system before exhaustion.
During the synthesis stage of LSC718, the quantity of function group has been maximized, which provides a high exchange capacity of radium.
SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium Physical and Chemical Characteristics:
|
Polymer Structure |
Gel polystyrene crosslinked with divinylbenzene |
|
Physical Appearance |
Beige opaque spheres beads |
|
Total Capacity |
0.8 eq/L |
|
Particle Size |
300 - 1250 μm |
|
Moisture Retention (%) |
61 - 72% |
|
Specific Gravity |
1.20 - 1.24 g/mL |
|
Shipping Weight (approx.) |
730 – 790 g/L |
|
Temperature Limit |
90°C (212.0 °F) |
|
Radium capacity |
11 – 18 nanocuries/g |
SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium Applications:
Radium adsorption in drinking water
SEPLITE® LSC718 Specially Developed Resin for Selective Removal of Radium Precautions:
Resins should be stored in sealed containers or bags in room temperature and dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
Contact Us
