SEPLITE® Monojet™ LSC7500
SEPLITE® Monojet™ LSC7500 is a weak acid, macroporous, chelating resin with amino phosphonic acid groups. This structure is good for the chelating with heavy metal ions.
Compared with the chelating resin with amino carboxylic acid groups, resins with amino phosphonic acid groups are much easier to chelating with certain cation ions. SEPLITE® Monojet™ LSC7500(amino phosphonic acid) is more suitable for purification the second brine during production of membrane caustic soda.
For SEPLITE® Monojet LSC7500(amino phosphonic acid), it enjoys the advantage of below:
1)Superior mechanical and excellent resistance to osmotic shock:
Good mechanical strength, low loss, less topping annually, stable Kinetics performance
2)High chelating capacity:
High chelating capacity leads to bigger amount of brine treated per cycle
3)More uniform for particle size:
Excellent running kinetics during regeneration
SEPLITE® Monojet™ LSC7500 Chelating Resin Physical and Chemical Characteristics:
|
Matrix Structure |
Polystyrene DVB, Macroporous |
|
Functional group |
Amino phosphonic acid |
|
Shipping form |
Na+ |
|
Physical Appearance |
Gray to light yellow spheres |
|
Particle range (mm) |
0.55-0.65 (≥95%) |
|
Moisture Content (%) |
55-65 |
|
Bulk Density (g/l) |
700-800 |
|
Density (g/l) |
1150-1250 |
|
Total capacity (eq/L) |
≥2.5 |
|
Uniformity coefficient |
≦1.1 |
|
Volume change Na-H (Max.) |
-30% |
SEPLITE® Monojet™ LSC7500 Chelating Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
Contact Us
