SEPLITE® Monojet™ LSF9710
grade, For Sugar and Sweetener industries"
SEPLITE® Monojet™ LSF9710 Ion Exchange Resin is a high-quality, high-capacity resin with uniform particle size specially developed for deashing of corn sugar and sweeteners.
The special pore structure and matrix enables its outstanding mechanical resistance to strong osmotic shock.
LSF 9710 showed superior features on regeneration efficiency while owning excellent kinetic and strong osmotic shock abilities.
Manufacturing process is fully compliant with European Union regulation on Ion Exchange Resins and Adsorbers used in the processing of foodstuffs ResAP 2004(3).
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® Monojet™ LSF9710 Food Grade Resin PhysicalandChemical Characteristics:
| Matrix Structure | Macroporous, Styrene-divinylbenzene | |
| Functional group | Sulfonic acid | Sulfonic acid |
| Shipping form | Na+ | H+ |
| Physical Appearance | Beige grey to brown spherical beads | Beige grey to brown spherical beads |
| Particle size (mm) | 0.63±0.05mm | 0.65±0.05mm |
| <0.3mm ≤0.1% | <0.3mm ≤0.1% | |
| ≥0.85mm ≤3.0% | ≥0.85mm ≤3.0% | |
| Moisture content (%) | 45-55 | 56-60 |
| Total Capacity(eq/L) | ≥1.8 | ≥1.6 |
| Bulk Density ( g/l) | 770-850 | 740-800 |
| Density ( g/l) | 1250-1280 | 1200-1250 |
| Whole beads count (%) | ≥95 | ≥95 |
| Uniformity coefficient | ≤1.1 | ≤1.1 |
|
Volume change (Na+ to H+-) Max. vol.% |
8% | |
SEPLITE® Monojet™ LSF9710 Food Grade Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
Contact Us
