SEPLITE® MC210
Na+ Form/H+ Form"
SEPLITE® MC210 was macroporous, strong acid cation ion exchange resins.
Compared with gel strong acid cation resin, the matrix of macroporous was much stronger.
The special matrix enables its outstanding mechanical resistance to strong osmotic shock.
As well, MC210 showed superior feather on regeneration efficiency.
MC210 is recommended used where high kinetic and strong osmotic shock feather was needed.
This resin was suitable for being used in both water and special applications.
SEPLITE® MC210 Cation Resin Physical and Chemical Characteristics:
Physical and Chemical Characteristics | |
Matrix Structure | Polystyrene Crosslinked DVB |
Physical Appearance | White to Cream spheres |
Particle range | 0.315-1.25mm (98%) |
Moisture Content | 55-60% |
Bulk Density | 770-830g/l |
Density | 1150-1300g/l |
Total capacity | ≥1.8eq/L |
Shipping Form | Na+ |
SEPLITE® MC210 Cation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, pleasecontact SUNRESIN® directly.