SEPLITE® MC240MB
NA+ Form/H+ Form"
SEPLITE® MC 240MB is a macroporous polystyrene cation-exchange resin whose functional group is sulfonic acid. It has a higher speed of ion exchange ability with good regeneration efficiency. It is also highly resistant to osmotic and thermal shock; its stable chemical and physical properties make it ideal in various applications. With MB particle size distribution which is ready for use in the mixed bed preparation.
SEPLITE® MC 240MB is widely used not only in water deionization or pure water preparation, but also in other areas such as hydrometallurgy, sugar treatment and demineralization of organic solutions.
SEPLITE® MC240MB Cation Exchange Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Macroporous Polystyrene DVB |
| Functional group | Sulfonic acid |
| Shipping form | Sodium or Hydrogen |
| Physical Appearance | Camel to brown Spherical beads |
| Particle size (mm) | 0.50-1.25 |
| Moisture content (%) | 45-55 |
| Total Capacity(eq/L) | ≥1.8 |
| Bulk Density ( g/l) | 750-850 |
| Density ( g/l) | 1230-1280 |
| Whole beads count (%) | ≥95 |
| Uniformity coefficient | ＜1.6 |
SEPLITE® MC240MB Cation Exchange Resin Key features and benefits:
-
High operating capacity
-
Good kinetic performance
-
Long lifetime
-
Easy to regeneration
SEPLITE® MC240MB Cation Exchange Resin Applications:
-
Pure water preparation
-
Rare element separation
SEPLITE® MC240MB Cation Exchange Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
