SEPLITE® LSF984
SEPLITE® LSF984 is sugar grade gel type 1, strong basic anion resin.
The structure was specially developed to make a balance between total capacity and regeneration efficiency. It also has excellent resistance to osmotic shock and good physical and chemical stability.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® LSF984 Strong Basic Anion Resin Physical and Chemical Characteristics:
| Matrix | Styrene Divinylbenzene copolymer, Gel |
| Functional Group | Type 1 Quaternary Ammonium |
| Physical Appearance | White to light yellow beads |
| Particle range (mm) | 0.4-1.25 (min,95%) |
| Shipping weight (g/ml) | 0.66-0.73 |
| Density (g/ml) | 1.07-1.10 |
| Total capacity (eq/L) | ≥1.2 (Cl form) |
| Moisture Content (%) | 53 - 63% (Cl form) |
| Volume Change( Cl- → OH-) | 20% （Max.vol） |
SEPLITE® LSF984 Strong Basic Anion Resin Applications:
-
Decolorization in sugar production like syrup, glycerine, grape must, fruit juices
SEPLITE® LSF984 Strong Basic Anion Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
