SEPLITE® MA920
SEPLITE® MA920 is a strong base type 2 anionic resin based on a macroporous polymer. It is best suited for demineralization of solution offering thanks to its type 2 active group high regeneration efficiency.
Due to its macroporous structure, it is especially resilient against organic matter and can be also used for their effective removal.
SEPLITE® MA920 Strong Base Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Macroporous Polystyrene DVB |
| Functional group | Quaternary Ammonium, Type 2 |
| Shipping form | Cl form |
| Physical Appearance | Ivory spheres |
| Particle size (mm) | 0.315-1.25 |
| Moisture content (%) | 42-52 (Cl- Form) |
| Total Capacity(eq/L) | ≥1.2 |
| Bulk Density ( g/l) | 650-750 |
| Density ( g/l) | 1000-1100 |
| Whole beads count (%) | ≥95 |
SEPLITE® MA920 Strong Base Resin Key features and benefits:
-
High operating capacity
-
Good kinetic performance
-
Long lifetime
SEPLITE® MA920 Strong Base Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
