SEPLITE® LXA81
SEPLITE® LXA81 is a nonionic, hydrophobic, cross-linked polymeric adsorbent.
Its adsorptive properties derive from its macroreticular pore structure, high surface area, designed pore size distribution, and the aromatic nature of its surface.
SEPLITE™ LXA81 could be used for the adsorption of organic substances of relatively low molecular weight from polar solvents or volatile organic compounds.
It has excellent physical, chemical, and thermal stability, and served quite a long time life by regenerations.
Advantages of SEPLITE® LXA81 Adsorbent Resin:
-
Resistance to all commonly used organic solvents;
-
High treating capacity, very strong mechanical stability;
-
Strong matrix and very long service time.
SEPLITE® LXA81 Adsorbent Resin Physical and Chemical Characteristics:
| Matrix | Crosslinked polymer |
| Physical Appearance | Spheres |
| Particle Size(mm) | 0.315-1.25 (95%) |
| Moisture (%) | 52-62 |
| Bulk density(g/l) | 650-750 |
| Density(g/l) | 1000-1100 |
| Surface area(M2/g) | 750 |
| Temperature limitation | 0-110℃ |
| PH range | 0-14 |
SEPLITE® LXA81 Adsorbent Resin Applications:
-
Removal of phenolic compounds;
-
Removal of aromatic compounds from water;
SEPLITE® LXA81 Adsorbent Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
